Nancy Trujillo Chair June 19th, 2018 - 23:36:01
Generally chair rail is basically molding that has plain rounded edges, although more complex routed moldings perform just as adequately. Just as the sophisticated curves and fancy routed molding can enhance your chair rail, so can embossed moldings or pressed wood or resin moldings. Any of these versions of molding provides an aspect of depth to what is otherwise a fairly plain horizontal line around the middle of a room.
Beanbag chairs have officially made a come back and many people are buying these cozy, inexpensive chairs. They are perfect for kids, teens, college students, and an extra seat in anyone's room... Since anyone can find standard beanbag chairs in a variety of colors just about anywhere you need to stand out from the rest. Offer custom made beanbag chairs for your customers - the color they want, the size they want, the fabric they want, the design they want, etc. You could make up to $100 or more per custom made beanbag chair.
I owned a bar once upon a time and we really bootstrapped it. We were short on start up money and needed a bunch of tables. These tables also had to be quite durable as our clientele tended to drink and carry on quite a bit. I'll admit that it wasn't me but my partner Scott that came up with the idea. Industrial spools. We found a place in Montreal that sold and re-sold huge industrial spools, the kind that can carry a few miles of telephone wire, anywhere from two to ten feet in diameter. We rented a van and went down there. The place was totally fine with us helping ourselves to six spools, each about four feet high and four feet in diameter. We simply sanded them down and applied generous amounts of shellac. They turned out beautifully.
Office chair casters are a good option to have due to the fact that you never know when you will need to move things around to accommodate a different situation outside of a meeting. Deciding whether to make your office chairs movable is just one of many options available to make.
Be sure to keep the size in proportion to the room as well as the additional decorative elements, though: a wide molding in a small room filled with fine, dainty furnishings will appear gawky and awkward. Too slender a rail in a larger room decorated with grand set pieces of furniture could look too insignificant and frail for the setting it is placed in. All the chair molding ideas you think about should take into consideration the design of the home where they will be seen.
Here are a couple chair ideas. Go exploring your own town and see where you can find discarded wooden window blinds. Cut them to about three feet wide stain and generously clear-coat them. You'll need to cut out a support form which you should find easily enough on the web by searching for 'window blind chair'. Cheap plywood will do the job. Cut the two support forms and glue/nail it all in place. After a few cracks at it you'll end up being able to build wonderfully cool chairs that cost next to nothing and can easily be sold for $100.00. The second is simply an old steel drum. These can be found anywhere for free and only need a good cleaning and some clear coat finish. Take a look at the photo. You only need to make a good cut, cover the edge with rubber edging and add a cheap cushion and some $10.00 legs. Again - this should sell for $100.00 easy.